CNC Machined Aluminum Rear Cover for Medical Wearable Monitoring Devices

This product page presents a custom CNC machined aluminum rear cover used in medical wearable monitoring devices and compact medical electronics. The part combines a rounded exterior, thin-wall body, gasket groove, screw holes and port opening in a small enclosure.

Product Overview

The rear cover can be produced from 6061 or 6082 aluminum according to customer drawings. Features may include internal ribs, screw bosses, O-ring or gasket grooves, side openings, countersinks and cosmetic chamfers.

Machining Notes

Machining focuses on wall stability, fixture support and finishing order. Roughing, rest machining and light finishing passes help maintain shape while protecting the gasket groove and port geometry.

Quality Control

Inspection covers wall thickness, flatness, gasket groove width, screw hole position, port opening, surface finish and visual appearance. CMM and gauges can support first article reporting.

Packaging and Delivery

Parts can be anodized, cleaned, separated by part number and packed in foam trays or individual bags for scratch protection.

FAQ

Is this a standard housing?

No. It represents a custom CNC machined rear cover manufactured according to customer CAD and drawings.

Which aluminum grades are suitable?

6061 and 6082 are common choices, while final material should follow mechanical, finish and drawing requirements.

Can gasket grooves be machined?

Yes. Gasket or O-ring grooves, screw bosses, ports and countersinks can be machined and inspected.

What finishes are available?

Clear or black anodizing, bead blasting and conversion coating can be supported when specified.

What inspection can be provided?

First article reports, CMM checks, thread verification, wall thickness checks and visual inspection are available.

What RFQ data is needed?

CAD, 2D drawing, material, finish, quantity, critical dimensions, inspection level and packaging rules are needed.