Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 16, 2026
Evaluating a Precision Machine Shop in Huangdai, Suzhou

Evaluating a Precision Machine Shop in Huangdai, Suzhou

Taking the Xiangcheng Huangdai Precision Parts Factory visit as the topic, an on-site audit list of constant temperature environment, equipment, tooling, measurement, outsourcing and abnormal management is given, and it is made clear that no fictitious data will be used when real visit records are not provided. The content is organized by OEMach.

Technical Articles Nov 16, 2026
UHV Semiconductor Chambers: Sealing Faces and Mirror Polishing

UHV Semiconductor Chambers: Sealing Faces and Mirror Polishing

Analyze the relationship between materials, flange sealing surfaces, surface treatment, cleaning, welding deformation and helium leak detection of ultra-high vacuum chambers of semiconductor equipment to avoid equating mirror appearance with vacuum performance. The content is organized by OEMach.

Technical Articles Nov 16, 2026
Medical Metal Parts: Clean Precision CNC Machining Requirements

Medical Metal Parts: Clean Precision CNC Machining Requirements

Describe the quality chain of medical device metal parts from materials, CNC processes, cleaning, controlled transfer to batch release, and clarify the boundaries of machining, cleanliness, biocompatibility and regulatory responsibilities. The content is organized by OEMach.

Technical Articles Nov 16, 2026
Multi-Bore Parts: Coaxiality and Perpendicularity in One Setup

Multi-Bore Parts: Coaxiality and Perpendicularity in One Setup

Focusing on the one-time clamping scheme of porous precision parts, the relationship between functional benchmarks, common axes, machining accessibility, boring sequence, tool deflection and CMM verification is explained. The content is organized by OEMach.

Technical Articles Nov 16, 2026
Sub-1 mm Thin-Wall Cavities: CNC Machining and Vacuum Clamping

Sub-1 mm Thin-Wall Cavities: CNC Machining and Vacuum Clamping

Analyze the deformation sources of precision cavities with wall thickness less than 1mm after removal, clamping and unclamping, and explain the applicable conditions of vacuum suction cups, adsorption calibration, roughing and finishing and free state detection methods. The content is organized by OEMach.

Technical Articles Nov 13, 2026
Precision POM-C CNC Milling for Hematology Analyzer Tube Mixer Saddles

Precision POM-C CNC Milling for Hematology Analyzer Tube Mixer Saddles

Define and inspect a machined POM-C support cradle for a closed-tube mixer, from contact arc and cap clearance to mounting height.

Technical Articles Nov 13, 2026
Precision 6061 CNC Milling for Anesthesia Workstation Service Locator Plates

Precision 6061 CNC Milling for Anesthesia Workstation Service Locator Plates

Design and inspect a 6061 access-panel service fixture plate using a round locator, a directional slot and a controlled mounting face.

Technical Articles Nov 13, 2026
Precision CNC Turning for 316L Ultrasonic Cleaning Basket Handle Pins

Precision CNC Turning for 316L Ultrasonic Cleaning Basket Handle Pins

Plan CNC turning and cross-drilling for 316L basket handle pins, with dimensional checks for shoulder position, clip clearance and edge finish.

Technical Articles Nov 13, 2026
Precision POM-C CNC Milling for Pathology Slide Loader Escapement Fingers

Precision POM-C CNC Milling for Pathology Slide Loader Escapement Fingers

Plan CNC milling and low-force inspection for POM-C slide loader escapement fingers, with attention to the stop nose and mounting datums.

Technical Articles Nov 13, 2026
Precision 6061 CNC Milling for Diagnostic Cartridge Ejector Pivot Brackets

Precision 6061 CNC Milling for Diagnostic Cartridge Ejector Pivot Brackets

Learn how to plan CNC machining and inspect paired pivot bores, ear spacing and mounting datums on a diagnostic cartridge ejector bracket.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.