Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 20, 2026
Five-Axis Laser Scanner Mounts: Accuracy and Alignment Efficiency

Five-Axis Laser Scanner Mounts: Accuracy and Alignment Efficiency

The difficulty of the laser scanning mirror mounting bracket is not only the angle processing, but also whether it can be positioned stably after assembly. This article explains how multi-angle mounting surfaces, adjustment interfaces and inspection benchmarks can be jointly confirmed.

Technical Articles Nov 20, 2026
Low-Volume CNC Vacuum Chambers: Sealing Faces, Threads and Cleanliness

Low-Volume CNC Vacuum Chambers: Sealing Faces, Threads and Cleanliness

Small batch processing of semiconductor vacuum chambers cannot only confirm the outer dimensions. The sealing surface, orifice status, threads, cleaning and handover methods need to be unified before quoting to avoid rework after assembly.

Technical Articles Nov 20, 2026
Optical Mounts: Common Datums for Lens, Retainer and Focus

Optical Mounts: Common Datums for Lens, Retainer and Focus

The assembly accuracy of the optical lens mount is not only determined by the lens aperture. This article explains how to unify the lens base, pressure ring and focusing mechanism to reduce repeated assembly and adjustment, eccentricity and drift after locking.

Technical Articles Nov 19, 2026
Precision PEEK CNC Milling for Laboratory Cryovial Cap Staging Combs

Precision PEEK CNC Milling for Laboratory Cryovial Cap Staging Combs

Define open-slot profiles, center spacing and released-state inspection for a PEEK cryovial cap staging comb used with inert references on a laboratory bench.

Technical Articles Nov 19, 2026
Precision 6061 CNC Milling for Ultrasound Gel Warmer Service Support Brackets

Precision 6061 CNC Milling for Ultrasound Gel Warmer Service Support Brackets

Define foot flatness, upright orientation and two-plane hole patterns for a 6061 right-angle bracket in a non-operating ultrasound gel warmer service fixture.

Technical Articles Nov 19, 2026
Precision 316L CNC Turning for Centrifuge Lid Service Hinge Bushings

Precision 316L CNC Turning for Centrifuge Lid Service Hinge Bushings

Define bore alignment, flange seating and released-state inspection for a 316L flanged hinge bushing in a non-operating laboratory centrifuge lid service fixture.

Technical Articles Nov 19, 2026
Precision PEEK CNC Milling for Histology Cassette Feeder Guide Liners

Precision PEEK CNC Milling for Histology Cassette Feeder Guide Liners

Define open-channel clearance, side-wall mounting holes and released-state inspection for a PEEK guide liner in a histology embedding cassette feeder bench fixture.

Technical Articles Nov 19, 2026
Precision 6061 CNC Machining for OCT Service Target Carrier Discs

Precision 6061 CNC Machining for OCT Service Target Carrier Discs

Plan pocket depth, flange support and three-hole alignment for a 6061 optical coherence tomography service target carrier without implying optical calibration results.

Technical Articles Nov 19, 2026
Precision 316L CNC Milling for Medical Suction Trolley Pole Saddle Clamps

Precision 316L CNC Milling for Medical Suction Trolley Pole Saddle Clamps

Define curved seating, mounting ears and inspection references for a 316L pole saddle clamp half in a medical suction trolley accessory bench fixture.

Technical Articles Nov 19, 2026
CNC Pricing for 10-100 Parts: Reducing Setup Cost per Unit

CNC Pricing for 10-100 Parts: Reducing Setup Cost per Unit

Break down the materials, programming, clamping, machine time, tooling, inspection, outsourcing and risks in a CNC small batch quotation of 10 to 100 pieces, and explain how fixed costs are diluted with quantity. The content is organized by OEMach.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.