Technical Articles
Manufacturing cost, DFM and process review notes.
Medical Analyzer Sensor Flags: Beam Crossing, Mounting References and CNC Inspection
CNC sensor-flag geometry for medical analyzers: vane edges, mounting references, clearance, final-condition inspection and separate detection validation.
Copper Alloy Machining: Causes and Fixes for Built-Up Edge
Built-up edge in copper machining results from ductile material adhering to the cutting edge, worsened by dull tools, rubbing, heat and poor chip evacuation. Learn a practical troubleshooting sequence.
Custom Robot Parts: Drawing-to-Prototype Lead Time
Custom robot parts usually need 3 to 10 working days from a complete drawing to first article. The real lead time depends on DFM, material, process, finishing and inspection preparation.
Standard vs Hard Anodizing for Aluminum Robot Parts
Choose standard or hard anodizing for aluminum robot parts by wear, insulation, corrosion, appearance and dimensional risk, not by assuming a thicker coating is always better.
0.01 mm Robot Repeatability: Required Part Tolerances
A robot repeatability specification of 0.01 mm does not mean every component needs a +/-0.005 mm tolerance. Learn how to allocate tolerances across the transmission and assembly chain.
Medical Equipment Shoulder Screws: Shoulder Length, Thread Relief and CNC Inspection
CNC guidance for medical equipment shoulder screws: shoulder length, thread transitions, head seating and inspection, with strength and mechanism validation separate.
Medical Equipment Service-Tool Nesting Blocks: Pocket Access, Tool Identity and CNC Inspection
CNC guidance for medical equipment service-tool nesting blocks: approved tool envelopes, blind pockets, retrieval access, polymer identity and inspection.
Medical Analyzer Encoder Covers: Internal Clearance, Cable Access and CNC Inspection
CNC guidance for medical analyzer encoder covers: cavity clearance, cable notches, flange references and inspection, with protection and encoder validation separate.
Medical Instrument Threaded Adjustment Knobs: Engagement, Contact Faces and CNC Inspection
CNC guidance for threaded medical instrument adjustment knobs: blind-thread engagement, collar contacts, knurl finishing and inspection, with mechanism validation separate.
Medical Equipment Service-Door Stop Blocks: Contact Geometry, Polymer Machining and Inspection
CNC guidance for medical equipment service-door stop blocks: polymer identity, controlled contact geometry, fastening, inspection and separate assembly validation.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.