Technical Articles
Manufacturing cost, DFM and process review notes.
CNC Parameters for Brass, Copper and Beryllium Copper
Brass, pure copper and beryllium copper cannot share one CNC parameter set. Alloy, temper, tool diameter, rigidity, chip control and safety determine the cutting window.
CNC Machining or 3D Printing for Low-Volume Plastic Parts?
Choose CNC machining or 3D printing for low-volume engineering plastic parts by test purpose, target material, tolerance, threads, surface finish and production intent.
Can One CNC Supplier Manage Five Materials in One Project?
One supplier can coordinate aluminum, stainless steel, copper alloys, engineering plastics and titanium only with controlled routing, traceability, subcontractor management and one quality interface.
Brass vs Copper vs Beryllium Copper for Small-Batch Parts
Compare brass, commercially pure copper and beryllium copper for small-batch parts by machinability, conductivity, heat transfer, spring performance, wear, temper and safety controls.
Medical Equipment Linkage Clevises: Fork Gap, Pin Bores and CNC Inspection
CNC linkage clevises for medical equipment: fork gap, paired pin bores, rod attachment, root transitions, inspection and separate load qualification.
PEEK Probe-Carrier Guide Bushings for Medical Analyzers: Bore, Flange and CNC Inspection
PEEK flanged bushings for medical analyzer probe-carrier outer shafts: bore and flange references, controlled holding, conditioning and inspection scope.
Fixed-Angle Sensor Wedges for Medical Analyzers: Mounting References and CNC Inspection
CNC sensor wedges for medical analyzers: inclined mounting faces, base references, hole direction, final treatment and separate alignment validation.
Medical Equipment Keyhole Retaining Plates: Entry Geometry, Sliding Clearance and CNC Inspection
Keyhole retaining plates for medical equipment covers: entry opening, sliding neck, contact faces and inspection, with independent retention and safety evaluation.
Closed-Tube Cap Parking Blocks for Medical Laboratories: Pockets, Contact Limits and CNC Inspection
Closed-tube cap parking blocks for medical laboratories: external-contact pockets, depth and spacing, polymer machining and separate contamination assessment.
Medical Analyzer Microplate Clamp Jaws: Contact Ledges, Access and CNC Inspection
Microplate clamp jaws for medical analyzers: approved plate contacts, ledge geometry, mounting references, CNC support and separate handling validation.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.