Technical Articles
Manufacturing cost, DFM and process review notes.
Tube-Cap Drive Sockets for Medical Analyzers: Contact Flats, Corner Clearance and POM-C Inspection
Define a POM-C socket for an identified external hexagonal cap, including blind-recess geometry, flange mounting and inspection without decapping-performance claims.
Optical Index Discs for Medical Analyzers: Slot Layout, Bore References and CNC Inspection
Define four radial slots, the shaft bore, reference relationships and edge inspection of a 6061 analyzer index disc without implying encoder performance.
Robot Base Flatness 0.02 mm: Milling or Grinding?
A 0.02 mm flatness requirement does not automatically require grinding. Choose finish milling or grinding by material, span, stiffness, roughness and assembly function.
Robot Part Final Inspection: What Requires a CMM?
Use a CMM for datum-related position, orientation and form on robot parts; use gauges and conventional tools where they provide faster, more reliable acceptance.
Ball-Ended Adjustment Studs for Medical Equipment: Spherical Contacts, Threads and CNC Inspection
Define a one-piece 316L adjustment stud with an integral spherical end, wrench section and external thread, while separating geometry from load performance.
Medical Analyzer Cuvette Transport Nests: Pocket Geometry, Handling Clearances and POM-C Inspection
Review four-pocket POM-C cuvette carriers for external container support, corner clearance, mounting, inspection and protective packaging without assay claims.
Angled Locating Rails for Medical Analyzers: Contact Faces, Mounting and CNC Inspection
Define the sloping faces, mounting references, clearance and final inspection of a 6061 analyzer locating rail without confusing it with a dovetail slide.
LiDAR Mirror Mount and Rotor Shaft Machining Requirements
LiDAR scanning mirror mounts and rotor shafts require a shared optical and rotational datum, controlled bearing fits, coaxiality, runout, surface finish and assembly verification.
Medical Equipment Countersunk Mounting Plates: Screw Seats, Remaining Sections and CNC Inspection
Specify two conical screw seats in a 316L medical equipment mounting plate: fastener match, bore pattern, plate contacts and finished-state CNC inspection.
Medical Equipment T-Slot Guide Sliders: Shoulder Clearance, Installation and POM-C Inspection
Define a black POM-C T-slot guide slider for medical equipment: rail interfaces, shoulder clearances, two plain mounting holes and finished-part inspection.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.