Technical Articles
Manufacturing cost, DFM and process review notes.
CT Phantom Indexing Fixtures: CNC Datums and Repeated Setup
How to specify, machine and inspect a removable CT quality assurance phantom locator without confusing fixture repeatability with scanner performance.
Portable Ultrasound Heat Spreaders: CNC Contact Lands and Gap Control
Plan a machined electronics heat spreader around the mounted gap, contact land, protective handling and separate system thermal tests.
Diagnostic Photometer Slit Plates: Edge Geometry and Optical Inspection
Define aperture geometry, wire EDM feasibility and calibrated edge inspection without conflating part dimensions with photometer performance.
Microfluidic Cartridge Keeper Frames: CNC Design and Inspection
Specify dry-side cartridge keeper frames through contact mapping, PEEK machining, free-state inspection and protected handling.
Robot Wrist Parts: Precision in Compact Multi-Axis Designs
Compact multi-DOF robot wrist parts require one datum strategy across bearing axes, reducer interfaces, multi-side holes, thin walls and cable-routing features.
AGV vs Industrial Robot Parts: What Changes?
AGV and industrial robot parts may share CNC processes, but loads, environment, weight, maintenance, datums and inspection priorities require different specifications.
Medical Equipment Plunger Housings: Threads and Blind Bores
CNC planning for a medical equipment plunger housing body: external threads, blind-bore depth, wall geometry, inspection access and protective handling.
Medical Analyzer Lead Screw Nuts: POM-C Machining and Alignment
Drawing-led CNC planning for POM-C lead screw nuts: thread identity, flange alignment, support, inspection and handling without unsupported motion claims.
Medical Analyzer Idler Pulleys: CNC Datums and Belt Contact
A drawing-led guide to smooth idler pulley bores, flange spacing, belt-contact surfaces, runout inspection and protective packaging for medical analyzers.
Cross-Dowel Barrel Nuts for Medical Equipment: Thread Orientation, Alignment Slots and CNC Inspection
Define a 316L cylindrical nut with a transverse female thread and an end-face alignment slot, while keeping thread inspection separate from joint capacity.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.