Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 21, 2026
6061 CNC Turning for ECG Simulator Fixture Counterbored Seating Washers

6061 CNC Turning for ECG Simulator Fixture Counterbored Seating Washers

Define concentric bores, counterbore depth, annular seating surfaces and remaining thickness when specifying custom 6061 washers for inert ECG simulator fixtures.

Technical Articles Nov 21, 2026
316L CNC Milling for Endoscope Service Fixture Square-Pocket Blocks

316L CNC Milling for Endoscope Service Fixture Square-Pocket Blocks

Specify blind square pockets, internal corner clearance, remaining floor thickness and inspection for custom 316L endoscope service fixture blocks.

Technical Articles Nov 21, 2026
PEEK, POM and PTFE Prototypes: Tooling and Dimensional Control

PEEK, POM and PTFE Prototypes: Tooling and Dimensional Control

The material differences, tool selection, heat and clamping control, removal sequence, burr treatment and final measurement conditions for small batch CNC prototyping of PEEK, POM and PTFE are explained respectively. The content is organized by OEMach.

Technical Articles Nov 21, 2026
DFM Before Prototyping: Reducing Machining and Material Costs

DFM Before Prototyping: Reducing Machining and Material Costs

Dismantling the value of small batch DFM from material loss, clamping, programming, machine time, tooling, inspection, outsourcing and change risks, and explaining how to quantify savings using front and rear process routes. The content is organized by OEMach.

Technical Articles Nov 21, 2026
High-Cosmetic CNC Prototypes and Low-Volume Structural Parts

High-Cosmetic CNC Prototypes and Low-Volume Structural Parts

Explain how to define appearance partitions, plan tool path texture, control burr marks, connect sandblasting anodes and complete limited sample acceptance for high-appearance industrial design prototypes and small batch structural parts. The content is organized by OEMach.

Technical Articles Nov 21, 2026
Huangdai Precision Machining for R&D and Low-Volume Production

Huangdai Precision Machining for R&D and Low-Volume Production

Combined with public information from Xiangcheng District Government, it explains how the Huangdai manufacturing and intelligent equipment industry environment supports R&D sampling and small-batch collaboration, and provides specific criteria for evaluating the capabilities of "post-factory". The content is organized by OEMach.

Technical Articles Nov 21, 2026
How to Keep 50-Part CNC Batches Dimensionally Consistent

How to Keep 50-Part CNC Batches Dimensionally Consistent

Explain how to ensure dimensional consistency of 50 small-batch parts in the absence of long-term mass production data through key characteristics, unified benchmarks, tooling reproduction, tool and thermal control, process inspection and measurement systems. The content is organized by OEMach.

Technical Articles Nov 21, 2026
POM-C Precision CNC Machining for Diagnostic Cartridge D-Profile Bushings

POM-C Precision CNC Machining for Diagnostic Cartridge D-Profile Bushings

Define the circular bore, external D-flat, released inspection and handling of custom POM-C anti-rotation bushings for inert diagnostic cartridge fixtures.

Technical Articles Nov 21, 2026
6061 Aluminum CNC Milling for Diagnostic Photometer LED Heat Sinks

6061 Aluminum CNC Milling for Diagnostic Photometer LED Heat Sinks

Review fin channels, base contact, mounting references, deburring and inspection when specifying custom 6061 LED heat sink blocks for photometer development.

Technical Articles Nov 21, 2026
316L CNC Thread Turning for Medical Wash-Basket Fixture Support Studs

316L CNC Thread Turning for Medical Wash-Basket Fixture Support Studs

Define external threads, disc-foot references, runout, inspection and handling for custom 316L support studs in an inert medical wash-basket fixture.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.