Technical Articles
Manufacturing cost, DFM and process review notes.
6061 Perimetry Response Button Housings: Guide Bore, Rear Cavity and CNC Inspection
Define a representative aluminum response-button shell using the guide bore, cover seat, rear cavity and cable opening as separate machining features.
POM-C Pharmacy Vial Labeler Guide Shoes: Contact Arcs and Adjustment Slots
Plan CNC milling and inspection of a representative acetal guide shoe with an open contact arc and two mounting slots.
316L Endoscope Drying Cabinet Hook Plates: Open Profiles and CNC Inspection
Review mounting datums, hook throat geometry, edge finish and inspection for a representative CNC-milled 316L cabinet hook plate.
6061 Medical Refrigerator Logger Mounts: Pocket Fit, Cable Relief and CNC Inspection
Specify an exterior CNC-milled logger mounting saddle using controlled seating surfaces, connector clearance and final-condition checks.
POM-C Urinalysis Test Strip Guides: Channel Clearance and Free-State Inspection
Plan CNC machining and inspection for a representative POM-C test strip guide, focusing on channel width, support, edge condition and dry bench checks.
316L Cryostat Specimen Discs: Face Grooves, Stem Datums and CNC Inspection
Define the stem, seating shoulder, grooved face, finish and inspection method for a representative precision-turned cryostat specimen disc.
Robot Parts from Prototype to Production: Process Handover
This article introduces how to freeze the version, establish a process transfer package, and use mass production resources to complete the first article and initial stage of strict control when precision robot parts move from prototype process to formal batch. The content is organized by OEMach.
Robot Planetary Gearbox Parts: Planet-Carrier Pin-Hole Accuracy
Explain how the planet carrier pin hole position, hole axis direction, fit and heat treatment deformation affect the load distribution of the planet wheel, and provide common reference processing, three-dimensional coordinates and trial assembly verification methods. The content is organized by OEMach.
Robot Torque-Sensor Flexures: Strain-Beam Consistency
Explain how elastomeric materials, symmetrical beam thickness, fillets, surface integrity, and residual stress affect sensitivity, zero point, hysteresis, and crosstalk, and provide a closed loop from processing to calibration. The content is organized by OEMach.
Explosion-Protected Painting Robot Parts: Aluminum and Surface-Treatment Limits
According to the OSHA spraying operation requirements and the ATEX framework, explosion protection is a system-level attribute of the equipment. Part materials, grounding interfaces, coatings and key coordination must comply with the certified design. The content is organized by OEMach.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.