Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 12, 2026
Lightweight Cobot Joint Parts: Balancing Mass and Rigidity

Lightweight Cobot Joint Parts: Balancing Mass and Rigidity

For collaborative robot joint shells, end covers and supports, explain how lightweight structures retain the stiffness of the interface between bearings and reducers, and control thin-wall processing, assembly preload and thermal drift. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Sealed Robot Sensor Housings: Precision Machining and Anodizing

Sealed Robot Sensor Housings: Precision Machining and Anodizing

Illustrating the synergy of IP targets, O-ring grooves, seal face shape and texture, cover plate stiffness, anodization and leak verification around the robotic sensor aluminum housing. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Robot Planetary Reducer Parts: Mill-Turn Machining

Robot Planetary Reducer Parts: Mill-Turn Machining

Analyze the common datum of the gear, box and planetary carrier in the robot planetary reducer, and explain how turning and milling compound can reduce the conversion of the center axis and pin hole angle to the datum. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Robot CNC Prototype Costs: Quotation Breakdown and Budget Control

Robot CNC Prototype Costs: Quotation Breakdown and Budget Control

For the robot R&D and procurement team, we break down the materials, programming, tooling, machine time, tools, testing, outsourcing, risks and delivery costs of non-standard CNC parts. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Five-Axis Machining of Humanoid Robot Frames: Reclamping Errors

Five-Axis Machining of Humanoid Robot Frames: Reclamping Errors

Explain how the integrated skeleton multi-faceted joint interface reduces clamping conversion errors through five-axis linkage, rotary axis calibration, functional benchmarks, zero-point fixtures and on-machine detection. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Dexterous Hand Parts: Controlling ±0.005 mm Tolerances

Dexterous Hand Parts: Controlling ±0.005 mm Tolerances

For the micro motor housing, joint connecting rod, micro shaft and pin hole, the datum, machine tool thermal state, micro tool, low force clamping and measurement capabilities required to establish the ±0.005 mm tolerance are explained. The content is organized by OEMach.

Technical Articles Nov 12, 2026
7075 Aluminum Robot Parts: Machining and Anodizing Control

7075 Aluminum Robot Parts: Machining and Anodizing Control

For high-strength lightweight structural parts for robots, the relationship between 7075 material status, cutting data, residual stress, thin-wall deformation and anodizing size compensation is explained. The content is organized by OEMach.

Technical Articles Nov 12, 2026
Precision CNC Milling for 6061 Ultrasound Cart Rail End Stops

Precision CNC Milling for 6061 Ultrasound Cart Rail End Stops

Design a custom 6061 aluminum ultrasound cart rail end stop around its contact face, locating step, mounting seats and final fit.

Technical Articles Nov 12, 2026
Precision CNC Milling for PEEK Microplate Reader Filter Carriers

Precision CNC Milling for PEEK Microplate Reader Filter Carriers

Specify the filter seat, clear aperture and locating datums for a custom PEEK microplate reader carrier, then verify them in a free-state inspection.

Technical Articles Nov 12, 2026
Precision CNC Turning for 316L Washer-Disinfector Spray Arm Spacers

Precision CNC Turning for 316L Washer-Disinfector Spray Arm Spacers

Learn how to specify and inspect a custom 316L spray arm spacer sleeve, including bearing faces, bore clearance, end play and protective packaging.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.