Technical Articles
Manufacturing cost, DFM and process review notes.
Low-Volume High-Mix Robot Parts: Production and Supply-Chain Control
Facing the multiple varieties, small batches and frequent changes in the robot research and development stage, it explains how to use configuration management, product family technology, work-in-progress control and first article evidence to maintain delivery order. The content is organized by OEMach.
Precision POM-C CNC Turning for Dental Lab Scanner Model Setup Pucks
Specify center bore fit, axial seating and face geometry for a custom POM-C setup puck used with a dental model scanner development fixture.
Precision CNC Milling for 6061 Diagnostic Monitor Bezel Frames
Define aperture profile, panel ledge and free-state flatness for a custom 6061 diagnostic monitor bezel.
Precision CNC Milling for Platelet Agitator Test Linkage Clevises
Specify fork width, transverse bore alignment and unloaded bench checks for a custom 316L platelet agitator test linkage clevis.
Precision CNC Milling for Laboratory Tube Capper Chute Transitions
Specify a custom aluminum cap-feed chute transition with controlled channel width, floor continuity and mechanical inspection.
Precision CNC Turning for Surgical Light Handle Inspection Rings
Specify a custom 316L ring gauge for checking the mechanical envelope of a surgical light handle, including gauge limits, bore geometry and verification.
Precision POM-C CNC Turning for Patient Monitor Paper Roll Spindles
Define journal fit, shoulder spacing and free-state runout for a custom POM-C thermal recorder paper roll spindle.
Precision 6061 CNC Milling for Slit Lamp Height Scale Carrier Plates
Specify the recess, mounting slots and flatness of a custom 6061 slit lamp scale carrier while keeping mechanical inspection separate from system alignment.
Precision POM-C CNC Milling for Laboratory Sample Rack Orientation Keys
Specify and inspect a custom POM-C orientation key for an automated sample tube rack, including tongue geometry, datums and separate forward and reverse checks.
Precision CNC Milling for 316L Pathology Workstation Splash Shield Mounts
Design a CNC milled 316L splash shield mount around panel clearance, slot geometry, mounting datums, deburring and the finished inspection condition.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.