Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 21, 2026
316L CNC Turning for Surgical Instrument Fixture Conical Locators

316L CNC Turning for Surgical Instrument Fixture Conical Locators

Define taper angle, axial references, usable contact surfaces and final inspection for custom 316L conical locating pieces in inert instrument fixtures.

Technical Articles Nov 21, 2026
Precision CNC Machining PEEK Indexing Rings for Ophthalmic Trial-Lens Fixtures

Precision CNC Machining PEEK Indexing Rings for Ophthalmic Trial-Lens Fixtures

Drawing-led PEEK turning and milling for a closed indexing ring with one external notch, covering remaining web geometry, references and released-part inspection.

Technical Articles Nov 21, 2026
CNC Milling 6061 Tapered Shim Wedges for Audiometer Service Fixtures

CNC Milling 6061 Tapered Shim Wedges for Audiometer Service Fixtures

Drawing-led CNC machining of 6061 aluminum tapered shims: datum selection, inclined-plane inspection, low-end thickness and handling for service fixtures.

Technical Articles Nov 21, 2026
316L CNC Turning and Knurling for Medical Tray Fixture Thumb Nuts

316L CNC Turning and Knurling for Medical Tray Fixture Thumb Nuts

Specify internal threads, diamond knurls, final diameter, end-face references and inspection for custom 316L thumb nuts in inert medical tray fixtures.

Technical Articles Nov 21, 2026
POM-C CNC Milling for Electrophoresis Accessory Three-Channel Divider Blocks

POM-C CNC Milling for Electrophoresis Accessory Three-Channel Divider Blocks

Define open channels, land spacing, base support and released inspection for custom POM-C divider blocks used in inert electrophoresis accessory staging fixtures.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.