Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Oct 08, 2026
CNC Machining Surgical Robot End-Effector Interfaces: Miniature Datums, Jaw Alignment and Clean Assembly

CNC Machining Surgical Robot End-Effector Interfaces: Miniature Datums, Jaw Alignment and Clean Assembly

A practical guide for machining surgical robot end-effector fixtures and jaw interfaces, covering material choice, miniature datums, burr control, inspection, passivation and clean delivery.

Technical Articles Sep 30, 2026
CNC Machining PCR Thermal-Cycler Sample Blocks: Well Geometry, Flatness and Thermal Repeatability

CNC Machining PCR Thermal-Cycler Sample Blocks: Well Geometry, Flatness and Thermal Repeatability

A practical guide to machining aluminum sample blocks and carriers for PCR and POCT equipment, covering well geometry, datum planning, coating, inspection, cleanliness and traceability.

Technical Articles Sep 30, 2026
CNC Machining Anesthesia Workstation Flow-Sensor Housings: Bore Alignment, Sealing and Cleanliness

CNC Machining Anesthesia Workstation Flow-Sensor Housings: Bore Alignment, Sealing and Cleanliness

A technical guide for anesthesia workstation flow-sensor housings, covering datum planning, bore alignment, sealing surfaces, burr control, customer-defined leak or flow testing and clean delivery.

Technical Articles Sep 29, 2026
CNC Machining Ophthalmic OCT Optical Platforms: Thermal Stability, Datums and Alignment

CNC Machining Ophthalmic OCT Optical Platforms: Thermal Stability, Datums and Alignment

A practical guide to machining optical base plates for ophthalmic OCT systems, covering thermal stability, datum strategy, precision holes, anodizing, inspection and clean delivery.

Technical Articles Sep 29, 2026
CNC Machining Ultrasound Probe Connector Housings: Alignment, Shielding, Sealing and Strain Relief

CNC Machining Ultrasound Probe Connector Housings: Alignment, Shielding, Sealing and Strain Relief

A practical guide to machining ultrasound probe connector housings, covering datum control, pin alignment, EMI contact paths, gasket features, inspection and clean delivery.

Technical Articles Sep 29, 2026
How to Evaluate Industrial Robot Parts Suppliers: 5 Key Criteria

How to Evaluate Industrial Robot Parts Suppliers: 5 Key Criteria

Industrial robot parts suppliers should be evaluated by process experience, inspection capability, delivery stability, abnormal response and repeat-order consistency.

Technical Articles Sep 24, 2026
CNC Machining Hematology Analyzer Probe Interfaces: Alignment, Wash Clearance and Cleanability

CNC Machining Hematology Analyzer Probe Interfaces: Alignment, Wash Clearance and Cleanability

A manufacturing guide for hematology analyzer sample-probe holders and wash interfaces, covering datum control, 316L machining, coaxiality, inspection and clean delivery.

Technical Articles Sep 24, 2026
CNC Machining Peristaltic Infusion Pump Roller Mechanisms: Occlusion Gap, Alignment and Wear Control

CNC Machining Peristaltic Infusion Pump Roller Mechanisms: Occlusion Gap, Alignment and Wear Control

A practical manufacturing guide for infusion pump roller carriers, covering datum planning, shaft alignment, occlusion-gap contributors, bearing fits, inspection and clean delivery.

Technical Articles Sep 23, 2026
CNC Machining Medical Centrifuge Rotor Interfaces: Runout, Mass Symmetry and Balance Control

CNC Machining Medical Centrifuge Rotor Interfaces: Runout, Mass Symmetry and Balance Control

A manufacturing guide for medical centrifuge rotor interfaces, covering datum selection, aluminum machining, bore concentricity, mass symmetry, inspection and clean traceable delivery.

Technical Articles Sep 23, 2026
CNC Machining MRI Patient-Positioning Fixtures: Material, Datum and Artifact Control

CNC Machining MRI Patient-Positioning Fixtures: Material, Datum and Artifact Control

A practical guide to CNC-machined MRI positioning fixtures, covering nonferromagnetic materials, PEEK stability, datum design, inspection, cleaning and traceable packaging.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.