Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Oct 23, 2026
Medical Equipment Fan Adapter Plates: Opening Geometry, Frame Support and CNC Inspection

Medical Equipment Fan Adapter Plates: Opening Geometry, Frame Support and CNC Inspection

CNC guidance for medical equipment fan adapter plates: opening references, frame support, mounting interfaces and inspection, with thermal validation kept separate.

Technical Articles Oct 22, 2026
Medical Instrument Spring Locating Seats: Pocket Geometry, End Contact and CNC Inspection

Medical Instrument Spring Locating Seats: Pocket Geometry, End Contact and CNC Inspection

CNC guidance for medical instrument spring locating seats: pocket and contact geometry, mounting references, edge finishing, inspection and separate load evaluation.

Technical Articles Oct 22, 2026
Medical Equipment Drawer Wear Strips: Sliding Faces, Fastener Recesses and CNC Inspection

Medical Equipment Drawer Wear Strips: Sliding Faces, Fastener Recesses and CNC Inspection

CNC guidance for medical equipment drawer wear strips: polymer grade, sliding faces, recessed fasteners, support conditions, inspection and separate life testing.

Technical Articles Oct 22, 2026
Diagnostic Instrument Optical Baffle Bodies: Aperture References, Internal Edges and CNC Inspection

Diagnostic Instrument Optical Baffle Bodies: Aperture References, Internal Edges and CNC Inspection

CNC guidance for diagnostic optical baffle bodies: aperture references, cavity access, internal edges, surface processes and separate optical validation.

Technical Articles Oct 21, 2026
Medical Equipment Cable-Gland Adapters: Thread Identity, Sealing Faces and CNC Inspection

Medical Equipment Cable-Gland Adapters: Thread Identity, Sealing Faces and CNC Inspection

CNC guidance for medical equipment cable-gland adapters: thread identification, sealing interfaces, passage edges, inspection and separate enclosure validation.

Technical Articles Oct 21, 2026
Internal Cable Guide Combs for Medical Equipment: Slot Geometry, Routing and CNC Inspection

Internal Cable Guide Combs for Medical Equipment: Slot Geometry, Routing and CNC Inspection

CNC guidance for internal medical equipment cable combs: jacket clearances, slot edges, material identity, mounting references and separate routing validation.

Technical Articles Oct 21, 2026
Medical Analyzer Belt-Idler Support Forks: Axle References, Clearances and CNC Inspection

Medical Analyzer Belt-Idler Support Forks: Axle References, Clearances and CNC Inspection

CNC guidance for medical analyzer idler forks: axle alignment, cheek spacing, mounting references, edge finishing, inspection and separate drive validation.

Technical Articles Oct 21, 2026
Medical Equipment Service-Door Hinge Blocks: Pin Bores, Alignment and CNC Inspection

Medical Equipment Service-Door Hinge Blocks: Pin Bores, Alignment and CNC Inspection

CNC guidance for medical equipment service-door hinge blocks: pin-bore relationships, mounting references, movement clearance, stainless machining and inspection.

Technical Articles Oct 21, 2026
PEEK Spacers for Medical Instruments: Stack Heights, Screw Clearances and CNC Inspection

PEEK Spacers for Medical Instruments: Stack Heights, Screw Clearances and CNC Inspection

CNC guidance for medical instrument PEEK spacers: grade identity, stack-height references, mounting-hole clearance, polymer inspection and qualification boundaries.

Technical Articles Oct 21, 2026
Medical Equipment Heat-Sink Bases: Contact Faces, Mounting Features and CNC Inspection

Medical Equipment Heat-Sink Bases: Contact Faces, Mounting Features and CNC Inspection

CNC guidance for medical equipment heat-sink bases: contact geometry, mounting references, surface condition, inspection and separate thermal validation.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.