Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Oct 26, 2026
Threaded Standoffs for Medical Equipment: Stack Length, Blind Threads and CNC Inspection

Threaded Standoffs for Medical Equipment: Stack Length, Blind Threads and CNC Inspection

Medical equipment male-female standoffs: seating length, usable blind thread, opposing engagement, tool access and CNC inspection of custom stainless parts.

Technical Articles Oct 26, 2026
Medical Laboratory Tray Support Rollers: Bore References, Running Surfaces and CNC Inspection

Medical Laboratory Tray Support Rollers: Bore References, Running Surfaces and CNC Inspection

Medical laboratory tray rollers: polymer bore and running-surface relationships, machining support, inspection conditions and separate transport validation.

Technical Articles Oct 26, 2026
Medical Analyzer Load-Cell Support Blocks: Contact Lands, Load Paths and CNC Inspection

Medical Analyzer Load-Cell Support Blocks: Contact Lands, Load Paths and CNC Inspection

Medical analyzer load-cell support blocks: mounting lands, equipment references, machining support and inspection without claiming sensor calibration.

Technical Articles Oct 26, 2026
Deep-Hole Machining Above 5:1: Gun Drill vs BTA

Deep-Hole Machining Above 5:1: Gun Drill vs BTA

Above a 5:1 depth-to-diameter ratio, guidance, chip evacuation, coolant and bore drift need formal review. Compare gun drilling and BTA drilling by diameter, depth, accuracy and volume.

Technical Articles Oct 26, 2026
Precision Deburring: Manual, ECM, Ultrasonic and Magnetic

Precision Deburring: Manual, ECM, Ultrasonic and Magnetic

Choose a precision deburring process by burr location, material, allowed edge break, batch size and cleanliness. Manual, ECM, ultrasonic cleaning and magnetic finishing have different limits.

Technical Articles Oct 24, 2026
Medical Equipment Counterbored Mounting Washers: Seat Depth, Contact Faces and CNC Inspection

Medical Equipment Counterbored Mounting Washers: Seat Depth, Contact Faces and CNC Inspection

CNC counterbored washers for medical equipment: head seating, remaining thickness, through clearance, contact references and separate joint validation.

Technical Articles Oct 24, 2026
Medical Laboratory Sample-Rack Locator Shoes: Contacts, Clearances and CNC Inspection

Medical Laboratory Sample-Rack Locator Shoes: Contacts, Clearances and CNC Inspection

Sample-rack locator shoe machining for medical laboratory equipment: stepped contacts, mounting references, polymer support, clearances and inspection.

Technical Articles Oct 24, 2026
Medical Analyzer Miniature-Pump Mounting Plates: Interfaces, Access and CNC Inspection

Medical Analyzer Miniature-Pump Mounting Plates: Interfaces, Access and CNC Inspection

CNC mounting plates for medical analyzer miniature pumps: mounting contacts, aperture relationships, service access and separate pump-system validation.

Technical Articles Oct 24, 2026
Medical Equipment Grooved Pivot Pins: Journal Geometry, Ring Seats and CNC Inspection

Medical Equipment Grooved Pivot Pins: Journal Geometry, Ring Seats and CNC Inspection

Grooved pivot-pin machining for medical equipment: journals, head references, external ring seats, edge condition and separate retention validation.

Technical Articles Oct 24, 2026
Medical Analyzer Timing-Belt Clamps: Tooth Match, Engagement and CNC Inspection

Medical Analyzer Timing-Belt Clamps: Tooth Match, Engagement and CNC Inspection

Timing-belt clamp machining for medical analyzers: approved tooth profile, engagement, mounting references, polymer support and separate retention testing.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.