Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Oct 28, 2026
CNC Parameters for Brass, Copper and Beryllium Copper

CNC Parameters for Brass, Copper and Beryllium Copper

Brass, pure copper and beryllium copper cannot share one CNC parameter set. Alloy, temper, tool diameter, rigidity, chip control and safety determine the cutting window.

Technical Articles Oct 28, 2026
CNC Machining or 3D Printing for Low-Volume Plastic Parts?

CNC Machining or 3D Printing for Low-Volume Plastic Parts?

Choose CNC machining or 3D printing for low-volume engineering plastic parts by test purpose, target material, tolerance, threads, surface finish and production intent.

Technical Articles Oct 27, 2026
Can One CNC Supplier Manage Five Materials in One Project?

Can One CNC Supplier Manage Five Materials in One Project?

One supplier can coordinate aluminum, stainless steel, copper alloys, engineering plastics and titanium only with controlled routing, traceability, subcontractor management and one quality interface.

Technical Articles Oct 27, 2026
Brass vs Copper vs Beryllium Copper for Small-Batch Parts

Brass vs Copper vs Beryllium Copper for Small-Batch Parts

Compare brass, commercially pure copper and beryllium copper for small-batch parts by machinability, conductivity, heat transfer, spring performance, wear, temper and safety controls.

Technical Articles Oct 27, 2026
Medical Equipment Linkage Clevises: Fork Gap, Pin Bores and CNC Inspection

Medical Equipment Linkage Clevises: Fork Gap, Pin Bores and CNC Inspection

CNC linkage clevises for medical equipment: fork gap, paired pin bores, rod attachment, root transitions, inspection and separate load qualification.

Technical Articles Oct 27, 2026
PEEK Probe-Carrier Guide Bushings for Medical Analyzers: Bore, Flange and CNC Inspection

PEEK Probe-Carrier Guide Bushings for Medical Analyzers: Bore, Flange and CNC Inspection

PEEK flanged bushings for medical analyzer probe-carrier outer shafts: bore and flange references, controlled holding, conditioning and inspection scope.

Technical Articles Oct 27, 2026
Fixed-Angle Sensor Wedges for Medical Analyzers: Mounting References and CNC Inspection

Fixed-Angle Sensor Wedges for Medical Analyzers: Mounting References and CNC Inspection

CNC sensor wedges for medical analyzers: inclined mounting faces, base references, hole direction, final treatment and separate alignment validation.

Technical Articles Oct 26, 2026
Medical Equipment Keyhole Retaining Plates: Entry Geometry, Sliding Clearance and CNC Inspection

Medical Equipment Keyhole Retaining Plates: Entry Geometry, Sliding Clearance and CNC Inspection

Keyhole retaining plates for medical equipment covers: entry opening, sliding neck, contact faces and inspection, with independent retention and safety evaluation.

Technical Articles Oct 26, 2026
Closed-Tube Cap Parking Blocks for Medical Laboratories: Pockets, Contact Limits and CNC Inspection

Closed-Tube Cap Parking Blocks for Medical Laboratories: Pockets, Contact Limits and CNC Inspection

Closed-tube cap parking blocks for medical laboratories: external-contact pockets, depth and spacing, polymer machining and separate contamination assessment.

Technical Articles Oct 26, 2026
Medical Analyzer Microplate Clamp Jaws: Contact Ledges, Access and CNC Inspection

Medical Analyzer Microplate Clamp Jaws: Contact Ledges, Access and CNC Inspection

Microplate clamp jaws for medical analyzers: approved plate contacts, ledge geometry, mounting references, CNC support and separate handling validation.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.