Technical Articles
Manufacturing cost, DFM and process review notes.
Medical Laboratory Closed-Tube Positioning Combs: Open Slots, Support Faces and CNC Inspection
Medical laboratory closed-tube positioning combs: open U slots, pitch, rear mounting, supported POM-C machining and dimensional inspection separate from assay qualification.
Medical Equipment Horseshoe Spacer Plates: Side Access, Contact Faces and CNC Inspection
Medical equipment horseshoe spacer plates: side-entry slot, axial contacts, final thickness, supported CNC machining and inspection separate from retention qualification.
CNC Threads: Turning, Thread Milling or Tapping?
Choose thread turning, thread milling or tapping by internal or external form, diameter, pitch, material, blind-hole depth, chip control, risk and batch size.
3-Axis, 4-Axis, 5-Axis or Horizontal CNC: Which Fits?
Choose 3-axis, 4-axis, 5-axis or horizontal CNC by feature access, setup count, datum transfer, tool interference, chip evacuation, batch size and total process cost.
Medical Equipment D-Profile Adapter Shafts: Flats, Shoulders and CNC Inspection
Medical equipment D-profile adapter shafts: journal references, flat position, shoulder contacts, finished-state CNC inspection and separate drive qualification.
Medical Equipment Terminal Spacer Bars: Hole Spacing, Support and PEEK Machining
PEEK terminal spacer bars for medical equipment: mechanical stand-off, hole relationships, supported machining and inspection distinct from electrical qualification.
Medical Detector Adapter Frames: Openings, Contact Lands and CNC Inspection
Medical detector adapter frames: opening clearance, mounting lands, thin-wall support, finished-condition CNC inspection and separate detector qualification.
Face-Hole Retaining Nuts for Medical Equipment: Threads, Seating Faces and CNC Inspection
Face-hole retaining nuts for medical equipment: internal thread, useful seating face, pin-tool holes, final-state inspection and separate retention evaluation.
Static Cable Guide Spools for Medical Equipment: Contact Radius, Flanges and CNC Inspection
Static cable guide spools for medical equipment: approved cable bend requirements, waist contact radius, flange clearance, polymer turning and inspection.
Medical Equipment Service Pull Handles: Mounting Feet, Clearance and CNC Inspection
CNC service pull handles for medical equipment: mounting feet, blind threads, hand clearance, finished-condition inspection and separate load evaluation.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.