Technical Articles
Manufacturing cost, DFM and process review notes.
Medical Equipment Split Shaft Collars: Free-State Geometry, Screw Access and CNC Inspection
Plan a medical equipment split shaft collar with defined bore, radial slit, screw interface and inspection state; separate geometry from clamp performance.
Medical Equipment Two-Hole Tie Links: Hole Spacing, Side Clearance and CNC Inspection
CNC planning for 316L medical equipment tie links: two plain bores, center distance, face contacts, profile transitions and inspection separate from linkage qualification.
Medical Equipment PEEK Cable Sleeves: Panel Fit, Bore Entries and CNC Inspection
CNC planning for natural PEEK cable pass-through sleeves: panel interfaces, smooth bore entries, connector access, flange contacts and dimensional inspection.
Medical Equipment Eccentric Adjustment Discs: Offset Geometry, Contacts and CNC Inspection
CNC planning for medical equipment eccentric discs: off-center bore, round exterior, useful contacts, adjustment envelope and dimensional inspection.
TC4 Titanium Optical Structures: Thermal Stability vs Weight
TC4 offers high specific strength and corrosion resistance with less expansion than aluminum, but optical structures still require a system thermal budget and controlled machining route.
Optical Sensor Mounts: Repeatability and Thermal Drift
Control optical sensor mount repeatability through a shared datum system, stiffness, locating features, assembly torque, material selection and temperature-aware inspection.
Medical Equipment Hex Coupling Nuts: Thread Engagement, End Access and CNC Inspection
CNC planning for 316L mechanical coupling nuts in medical equipment: continuous internal threads, engagement at both ends, wrench access and dimensional inspection.
Medical Equipment V-Groove Sensor Supports: Contact Geometry, Mounting and POM-C Inspection
CNC planning for black POM-C supports contacting sealed sensor exteriors: V faces, root clearance, mounting references, polymer identity and inspection limits.
Medical Equipment Slotted Adjustment Plates: Travel, Contact Faces and CNC Inspection
CNC planning for medical equipment adjustment plates: two closed slots, useful travel, mounting contacts, finished geometry and inspection separate from holding qualification.
Relieved Locating Pins for Medical Equipment: Directional Clearance, Orientation and CNC Inspection
Relieved locating pins for medical equipment: directional clearance, remaining contact surfaces, mounting references, orientation and CNC inspection without repeatability claims.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.