Technical Articles
Manufacturing cost, DFM and process review notes.
Robot Linear Guide Slider Block Machining: How to Control Rail Face Flatness and Hole Position
Learn how to control the rail mounting face, hole position, datum alignment and inspection items for robot linear guide slider block machining.
CNC Machining Medical Fluid Control Valve Bodies and Microfluidic Manifolds
Practical CNC machining guidance for medical fluid control valve bodies and microfluidic manifolds, covering material selection, micro ports, sealing faces, burr control, inspection and clean packaging.
CNC Machining Medical Diagnostic Equipment Housings and Sensor Brackets
Practical CNC machining guidance for medical diagnostic equipment housings and sensor brackets, covering material choice, sealing grooves, optical alignment, heat control, inspection and clean packaging.
CNC Machining Titanium Implant Test Parts and Medical Fixtures
Practical CNC machining guidance for titanium implant test parts and medical fixtures, covering material certificates, threaded holes, datum control, surface finish, inspection and packaging.
CNC Machining Medical Robot End Effectors and Positioning Fixtures
Practical guidance for CNC machining medical robot end effectors and positioning fixtures, covering datum strategy, material choice, gripper features, tolerance control, inspection and clean packaging.
CNC Machining Surgical Instrument Prototypes: From Ergonomics to Inspection
A practical guide to CNC machining surgical instrument prototypes, covering ergonomic geometry, material selection, hinge details, burr control, passivation, inspection reports and clean packaging.
Medical Device CNC Machining: Material, Cleanliness and Inspection Tips
Practical CNC machining guidance for medical device components, covering material selection, traceability, burr control, cleanliness, inspection reports, packaging and RFQ preparation.
CNC Machining O-Ring Grooves and Sealing Faces: RFQ Tips for Buyers
Learn what buyers should specify for CNC machined O-ring grooves and sealing faces, including groove depth, flatness, surface finish, burr control and leak testing.
CNC Machining Heat Sinks and Cooling Plates: DFM Tips for Buyers
Learn what engineering buyers should specify for CNC machined heat sinks and liquid cooling plates, including material, flatness, channels, sealing, finish and inspection.
Designing Threaded Holes for CNC Machined Parts: What Buyers Should Check
Learn how to specify threaded holes, thread depth, inserts, edge distance, burr control, surface finish and inspection requirements for CNC machined parts before RFQ.
Need manufacturing feasibility reviews?
Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.