Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 09, 2026
6061 CNC Milling for Retinal Camera Mount Dovetail Shoes: Flanks and Clamp Alignment

6061 CNC Milling for Retinal Camera Mount Dovetail Shoes: Flanks and Clamp Alignment

Review a retinal camera support dovetail shoe through angled contacts, reliefs, screw access, free-state inspection and an identified inert rail comparison.

Technical Articles Nov 09, 2026
POM-C CNC Machining for Portable ECG Recorder Battery Trays: Pockets and Clearances

POM-C CNC Machining for Portable ECG Recorder Battery Trays: Pockets and Clearances

Review a non-electrical POM-C battery tray through pocket supports, end clearance, cable exits, mounting references and controlled inspection.

Technical Articles Nov 09, 2026
316L CNC Turning for Medical Analyzer Carousel Hubs: Keyways and Flange Alignment

316L CNC Turning for Medical Analyzer Carousel Hubs: Keyways and Flange Alignment

Plan a reagent carousel drive hub through bore references, keyway geometry, flange patterns, radial threads and traceable dimensional inspection.

Technical Articles Nov 09, 2026
Pneumatic Robot Gripper Parts: Bore and Seal Groove Control

Pneumatic Robot Gripper Parts: Bore and Seal Groove Control

How bore cylindricity, surface texture, piston clearance, seal-groove section and edge quality prevent sticking, leakage and early seal damage in pneumatic grippers.

Technical Articles Nov 09, 2026
Robot Encoder Mount Machining: Eccentricity and Angle Error

Robot Encoder Mount Machining: Eccentricity and Angle Error

How encoder-center eccentricity, face runout, readhead gap and assembly repeatability create periodic angle errors, and how machining and calibration data should be connected.

Technical Articles Nov 09, 2026
AGV Drive Wheel Shafts: Wear Resistance and Precision

AGV Drive Wheel Shafts: Wear Resistance and Precision

How load direction, material and surface hardening, bearing fits, post-treatment finishing and assembly tests balance wear resistance and accuracy in AGV wheel shafts.

Technical Articles Nov 09, 2026
Robot Vision Bracket Machining: Calibration Stability

Robot Vision Bracket Machining: Calibration Stability

How camera-mount datums, locating features, stiffness, thermal behavior and repeated installation affect robot-vision calibration stability.

Technical Articles Nov 09, 2026
Cobot End Flange Machining: ISO Interface Repeatability

Cobot End Flange Machining: ISO Interface Repeatability

How an ISO 9409-1 interface, mounting face, center pilot, oriented hole pattern, cleanliness and tightening affect repeated cobot tool installation.

Technical Articles Nov 09, 2026
Robot Cable Drive Parts: Pulley and Tensioner Machining

Robot Cable Drive Parts: Pulley and Tensioner Machining

How pulley groove geometry, bearing-axis alignment, surface integrity and usable tensioner travel affect friction, backlash and cable life in robot drives.

Technical Articles Nov 09, 2026
RV Reducer Machining: Cycloidal Disc and Pin Accuracy

RV Reducer Machining: Cycloidal Disc and Pin Accuracy

How cycloidal profile, eccentric bores, pin distribution, modification data and paired testing combine to control RV reducer transmission quality.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.