Resources / Technical Articles
Technical Articles

Technical Articles

Manufacturing cost, DFM and process review notes.

Technical Articles Nov 11, 2026
6061 Perimetry Response Button Housings: Guide Bore, Rear Cavity and CNC Inspection

6061 Perimetry Response Button Housings: Guide Bore, Rear Cavity and CNC Inspection

Define a representative aluminum response-button shell using the guide bore, cover seat, rear cavity and cable opening as separate machining features.

Technical Articles Nov 11, 2026
POM-C Pharmacy Vial Labeler Guide Shoes: Contact Arcs and Adjustment Slots

POM-C Pharmacy Vial Labeler Guide Shoes: Contact Arcs and Adjustment Slots

Plan CNC milling and inspection of a representative acetal guide shoe with an open contact arc and two mounting slots.

Technical Articles Nov 11, 2026
316L Endoscope Drying Cabinet Hook Plates: Open Profiles and CNC Inspection

316L Endoscope Drying Cabinet Hook Plates: Open Profiles and CNC Inspection

Review mounting datums, hook throat geometry, edge finish and inspection for a representative CNC-milled 316L cabinet hook plate.

Technical Articles Nov 11, 2026
6061 Medical Refrigerator Logger Mounts: Pocket Fit, Cable Relief and CNC Inspection

6061 Medical Refrigerator Logger Mounts: Pocket Fit, Cable Relief and CNC Inspection

Specify an exterior CNC-milled logger mounting saddle using controlled seating surfaces, connector clearance and final-condition checks.

Technical Articles Nov 11, 2026
POM-C Urinalysis Test Strip Guides: Channel Clearance and Free-State Inspection

POM-C Urinalysis Test Strip Guides: Channel Clearance and Free-State Inspection

Plan CNC machining and inspection for a representative POM-C test strip guide, focusing on channel width, support, edge condition and dry bench checks.

Technical Articles Nov 11, 2026
316L Cryostat Specimen Discs: Face Grooves, Stem Datums and CNC Inspection

316L Cryostat Specimen Discs: Face Grooves, Stem Datums and CNC Inspection

Define the stem, seating shoulder, grooved face, finish and inspection method for a representative precision-turned cryostat specimen disc.

Technical Articles Nov 11, 2026
Robot Parts from Prototype to Production: Process Handover

Robot Parts from Prototype to Production: Process Handover

This article introduces how to freeze the version, establish a process transfer package, and use mass production resources to complete the first article and initial stage of strict control when precision robot parts move from prototype process to formal batch. The content is organized by OEMach.

Technical Articles Nov 11, 2026
Robot Planetary Gearbox Parts: Planet-Carrier Pin-Hole Accuracy

Robot Planetary Gearbox Parts: Planet-Carrier Pin-Hole Accuracy

Explain how the planet carrier pin hole position, hole axis direction, fit and heat treatment deformation affect the load distribution of the planet wheel, and provide common reference processing, three-dimensional coordinates and trial assembly verification methods. The content is organized by OEMach.

Technical Articles Nov 11, 2026
Robot Torque-Sensor Flexures: Strain-Beam Consistency

Robot Torque-Sensor Flexures: Strain-Beam Consistency

Explain how elastomeric materials, symmetrical beam thickness, fillets, surface integrity, and residual stress affect sensitivity, zero point, hysteresis, and crosstalk, and provide a closed loop from processing to calibration. The content is organized by OEMach.

Technical Articles Nov 11, 2026
Explosion-Protected Painting Robot Parts: Aluminum and Surface-Treatment Limits

Explosion-Protected Painting Robot Parts: Aluminum and Surface-Treatment Limits

According to the OSHA spraying operation requirements and the ATEX framework, explosion protection is a system-level attribute of the equipment. Part materials, grounding interfaces, coatings and key coordination must comply with the certified design. The content is organized by OEMach.

Need manufacturing feasibility reviews?

Upload STEP/STP/PDF files with tolerances to start DFM feedback before quoting.

Start your project

Tell us what you need manufactured.

Share your part requirements. Our engineering team will review them and contact you with the next steps.

For a useful review, include:

  • Material and quantity
  • Critical tolerances
  • Surface finish and target delivery

* Required fields

Drawings & supporting files 0 of 10 files

For faster review, include a PDF drawing and STEP/STP model. For assemblies, package all referenced parts and the BOM in one archive.

By submitting, you agree that OEMach may use this information and any uploaded files to respond to your inquiry. See our Privacy Policy.